GML SERIES

GML系列主要技術參數

GML Series Optional Configurations

Angular Head
Spindle Center Through-Coolant & High-Pressure Water Pump
Two-Speed Gearbox
Oil Chiller
Taiwan CNC System

Item		Unit	GML1313L	GML1616L	GML2020L	GML1514	GML2014	GML2514	GML2017	GML2517	GML3017
Worktable	Worktable Size (L×W)	mm	1300×1000	1600×1300	2000×1700	1500×1200	2000×1200	2500×1200	2000×1500	2500×1500	3000×1500
	Max. Worktable Load	kg	2000	3000	4000	2000	3000	4000	4000	5000	6000
	T-slot (No. of slots-slot width×pitch)	mm	7-22	7-22	7-22	7-22×150	7-22×150	7-22×150	7-22×200	7-22×200	7-22×200
	Worktable Longitudinal Travel (X-axis)	mm	1400	1800	2100	1600	2200	2700	2200	2700	3200
Travel Range	Crossbeam Lateral Travel (Y-axis)	mm	1400	1700	2100	1400	1400	1400	1800	1800	1800
	Headstock Vertical Travel (Z-axis)	mm	700	700	700	800	800	800	1000	1000	1000
	Gantry Width	mm	1350	1650	2050	1400	1400	1400	1700	1700	1700
	Max. Height of Workpiece	mm	1000	1000	1000	870	870	870	1120	1120	1120
	Distance from Spindle Face to Worktable	mm	300–1000	300–1000	300–1000	70–870	70–870	70–870	120–1120	120–1120	120–1120
Spindle	Spindle Type	/	Belt-driven Spindle	Belt-driven Spindle	Belt-driven Spindle	Belt-driven Spindle	Belt-driven Spindle	Belt-driven Spindle	Belt-driven Spindle	Belt-driven Spindle	Belt-driven Spindle
	Max. Spindle Speed	rpm	6000	6000	6000	6000	6000	6000	6000	6000	6000
	Spindle Taper	/	BT50/φ190	BT50/φ190	BT50/φ190	BT50/φ190	BT50/φ190	BT50/φ190	BT50/φ190	BT50/φ190	BT50/φ190
Feed Rate	Rapid Traverse Speed (X/Y/Z)	m/min	20/20/12	20/20/12	20/20/12	24/24/12	8/8/12	8/8/12	8/10/10	12/10/10	12/10/10
	Cutting Feed Rate	mm/min	1–10000	1–10000	1–10000	1–10000	1–8000	1–8000	1–8000	1–8000	1–8000
Motor	Spindle Motor Power	kW	15/18.5	15/18.5	15/18.5	15/18.5	15/18.5	15/18.5	15/18.5	15/18.5	15/18.5
	Servo Motor Torque (X/Y/Z)	Nm	35/28/28	35/28/28	35/28/28	35/27/27	35/27/27	35/27/27	35/27/27	35/27/27	35/27/27
	Coolant Pump Motor Power	kW	0.75	0.75	0.75	0.75	0.75	0.75	0.75	0.75	0.75
Accuracy	Positioning Accuracy (X/Y/Z)	mm	0.025/0.020/0.015	0.025/0.020/0.015	0.025/0.020/0.015	0.025/0.020/0.015	0.03/0.020/0.015	0.03/0.020/0.015	0.025/0.020/0.015	0.03/0.020/0.015	0.03/0.020/0.015
	Repeat Positioning Accuracy (X/Y/Z)	mm	0.014/0.012/0.010	0.014/0.012/0.010	0.014/0.012/0.010	0.014/0.012/0.010	0.014/0.012/0.010	0.014/0.012/0.010	0.014/0.012/0.010	0.014/0.012/0.010	0.014/0.012/0.010
Feed Drive	Linear Guide (X/Y/Z)	mm	45/2; 45/2; Slide	45/2; 45/2; Slide	45/2; 45/2; Slide	45/2; 45/2; Slide	45/2; 45/2; Slide	45/2; 45/2; Slide	45/2; 55/2; Slide	45/2; 55/2; Slide	45/2; 55/2; Slide
	Ball Screw (X/Y/Z)	mm	50/50/50	50/50/50	50/50/50	5512/50/10/5010	6310/50/10/5010	6316/50/10/5010	6310/6310/50/10	6316/6310/50/10	6316/6310/50/10
System	CNC System	/	SYNTEC	SYNTEC	SYNTEC	FANUC	FANUC	FANUC	FANUC	FANUC	FANUC
Power Supply	Power Supply	KVA	35	35	35	35	35	35	38	38	38
Air Pressure	Air Demand	kg/cm²	≥6	≥6	≥6	≥6	≥6	≥6	≥6	≥6	≥6
	Air Flow Rate	m³/min	≥0.5	≥0.5	≥0.5	≥0.5	≥0.5	≥0.5	≥0.5	≥0.5	≥0.5
ATC Option	ATC Type	/	Disc-type ATC	Disc-type ATC	Disc-type ATC	Disc-type ATC	Disc-type ATC	Disc-type ATC	Disc-type ATC	Disc-type ATC	Disc-type ATC
	ATC Capacity	pcs	24	24	24	24	24	24	24	24	24
	Max. Tool Weight	kg	15	15	15	15	15	15	15	15	15
	Max. Tool Diameter (Full)	mm	110	110	110	110	110	110	110	110	110
	Max. Tool Diameter (Adjacent Empty)	mm	200	200	200	200	200	200	200	200	200
	Max. Tool Length	mm	350	350	350	350	350	350	350	350	350
	Tool Change Time	s	3.8	3.8	3.8	3.8	3.8	3.8	3.8	3.8	3.8
Machine Dimensions	Floor Space (L×W×H)	mm	4250×3150×3200	4850×4000×3200	6500×4300×3200	5400×3400×3900	6000×3400×3900	7000×3400×3900	6000×3950×4100	7000×3950×4100	8200×3950×4100
	Machine Weight (Approx.)	kg	14500	19500	22500	14500	17000	19500	19500	21000	23000
Note	Technical parameters are subject to change without prior notice.